Use this free DTF gang sheet calculator to estimate how many designs fit on a 22 inch wide gang sheet, which sheet length gives you the lowest price, and what each transfer will cost. It works as a quick DTF price calculator for planning any custom transfer order. Enter the approximate width, height and quantity of each design. No artwork is needed.
Already have your artwork? Our DTF Gang Sheet AutoBuilder builds the gang sheet for you and automatically calculates the cost while you load your designs. This calculator is most helpful when you don't have finished artwork yet but know the approximate size and quantity of your project.
Open the AutoBuilder →How It Works
Enter the size and quantity of each design, and the calculator shows the best sheet size, total price and cost per transfer. See the step-by-step instructions below ↓
1. Enter your design sizes
Measure each design at the size you want it printed, edge to edge of the artwork (trim transparent space). All gang sheets are 22" wide with 0.2" spacing between designs. Designs with one side 11" or less print two across, and we rotate designs automatically when it fits more on the sheet.
How to use the DTF gang sheet calculator
- Enter the width, height and quantity of each design at the size you want it printed.
- The calculator lays your designs out on a 22 inch wide sheet with 0.2 inches between designs, rotating them when that fits more.
- It compares every gang sheet length and finds the lowest cost combination for your full quantity.
- Review the layout preview, total price and cost per transfer, then start your sheet in the AutoBuilder.
DTF gang sheet sizes and prices
| Sheet size | Price | Price Per Square Inch |
|---|---|---|
| 22" x 24" | $19.99 | $0.0379 |
| 22" x 60" | $40.00 | $0.0303 |
| 22" x 96" | $56.00 | $0.0265 |
| 22" x 120" | $70.00 | $0.0265 |
| 22" x 144" | $84.00 | $0.0265 |
| 22" x 168" | $94.00 | $0.0254 |
| 22" x 192" | $105.00 | $0.0249 |
| 22" x 216" | $118.00 | $0.0248 |
| 22" x 240" | $130.00 | $0.0246 |
Gang sheet calculator FAQs
How wide is a DTF gang sheet at We Print U Press?
Every We Print U Press DTF gang sheet is 22 inches wide. You choose the length, from 24 inches up to 240 inches.
How much space is left between designs?
The calculator leaves 0.2 inches of space between designs. No margin is added at the edges of the sheet.
Can two 11 inch designs print side by side?
Yes. Any design with at least one side of 11 inches or less can print two across on a 22 inch sheet. The calculator rotates designs automatically when that fits more on the sheet.
Do I need finished artwork to use the gang sheet calculator?
No. The calculator only needs the approximate width, height and quantity of each design, so it works for planning a project before your artwork is ready.
What is the difference between the calculator and the AutoBuilder?
The calculator gives a quick estimate from sizes and quantities. The DTF Gang Sheet AutoBuilder builds the actual gang sheet and automatically calculates the cost while you load your designs, so use it when your artwork is ready.
Is the calculator price my final price?
No, it is an estimate. Your final sheet length and price are set by the AutoBuilder when you upload your artwork.
