Skip to content
en
USD
How to Apply UV Transfers

How to Apply UV Transfers

on

Application Instructions

1. Clean surface thoroughly with Isopropyl Alcohol.

2.  Rub back surface of UV transfer with a squeegee (or firm plastic edge like a credit care) firmly.  (You should see a bit of a silhouette of your design on the backside.)

3.  Peel sticky side and design transfer off of backing sheet.

4. Place the transfer on the item ensuring design is straight and positioned correctly.  Caution: The glue is very strong and generally can't be repositioned once touching the surface.

5. Press the transfer down, working from the center outwards, pushing out any bubbles using your fingers and the squeegee.

6. Rub all over the design with your fingers, be sure to rub the entire surface.  You can't over do this step!

7. Wait a couple of minutes and then peel clear film off the front slowly and at an angle and you're done!

We do not recommend placing items with these transfers in the dishwasher or microwave.  Hand wash is strongly recommended.  We are not responsible for application mistakes, misalignment, etc.  We recommend practicing with these transfers until confident before offering them for sale.

*Please note:  Not all brands of glass cups have the exact same measurements. Designs may vary from transfer to transfer and may require some trimming and adjustment for your items.

    Leave your thought here

    Please note, comments need to be approved before they are published.

    Related Posts

    DTF transfers, using a home iron for DTF, DTF transfer with iron, heat press for DTF, starting a custom t-shirt business
    October 12, 2024
    Can I Use a Home Iron for DTF Transfers? Here’s What You Need to Know

    Wondering if you can use a home iron for DTF transfers? Learn the pros and cons of using an iron...

    Read More
    Meet Your WPUP Team!
    September 11, 2024
    Meet Your WPUP Team!
    Drawer Title
    Similar Products