Application Instructions
Or click here to watch our video tutorial
1. Clean surface thoroughly with Isopropyl Alcohol.
2. Rub back surface of UV transfer with a squeegee (or firm plastic edge like a credit care) firmly. (You should see a bit of a silhouette of your design on the backside.)
3. Peel sticky side and design transfer off of backing sheet.
4. Place the transfer on the item ensuring design is straight and positioned correctly. Caution: The glue is very strong and generally can't be repositioned once touching the surface.
5. Press the transfer down, working from the center outwards, pushing out any bubbles using your fingers and the squeegee.
6. Rub all over the design with your fingers, be sure to rub the entire surface. You can't over do this step!
7. Wait a couple of minutes and then peel clear film off the front slowly and at an angle and you're done!
We do not recommend placing items with these transfers in the dishwasher or microwave. Hand wash is strongly recommended. We are not responsible for application mistakes, misalignment, etc. We recommend practicing with these transfers until confident before offering them for sale.
*Please note: Not all brands of glass cups have the exact same measurements. Designs may vary from transfer to transfer and may require some trimming and adjustment for your items.
1 comment
This is something I would like to try. Just for my own uses