Skip to content
en
USD
Skip to product information
Description

This is a 'faux' sequin and 'faux' embroidery design, not glitter ink or actual stitching.  This design has color options.  You will select desired color when adding to cart. 

The watermark will not print on your ordered files.

You are purchasing a direct to film transfer that will require the use of a heat press.  If this is your first time ordering from us or you are working with new fabric, we do recommend ordering a couple extra transfers so that you can determine the optimal time, temperature and pressure setting as each heat press does vary.  

The film is a “cold peel” which means the film needs to be completely cool before attempting to peel the film away from the design.

Refer to the How to Press section for more details instructions.

Care Instructions
Wash on cold, never iron directly on print. Tumbl;e dry low, do not use fabric softener.

Awareness Ribbon faux sequin and faux embroidery DTF Transfer (See Color Options)

Regular price $2.00

Shipping calculated at checkout

Measurement is based on the longest side of the design

Model wears Size Medium, Mockup may not be truly representative of final print size.

Description

This is a 'faux' sequin and 'faux' embroidery design, not glitter ink or actual stitching.  This design has color options.  You will select desired color when adding to cart. 

The watermark will not print on your ordered files.

You are purchasing a direct to film transfer that will require the use of a heat press.  If this is your first time ordering from us or you are working with new fabric, we do recommend ordering a couple extra transfers so that you can determine the optimal time, temperature and pressure setting as each heat press does vary.  

The film is a “cold peel” which means the film needs to be completely cool before attempting to peel the film away from the design.

Refer to the How to Press section for more details instructions.

Care Instructions
Wash on cold, never iron directly on print. Tumbl;e dry low, do not use fabric softener.
Awareness Ribbon Faux Sequins Dtf Transfer (See Color Options) Transfers
Awareness Ribbon faux sequin and faux embroidery DTF Transfer (See Color Options)

HOW TO PRESS

DO NOT PRESS THE COLOR RIBBON THAT RUNS ALONG YOUR TRANSFER ROLL, IT WILL NOT COME OFF OF THE SHIRT  

PRE-PRESS

Pre-Press garment for 5 seconds (prior to applying image), this step helps remove wrinkles and any potential moisture trapped in the fabric.

*Please note: Since all heat presses vary in terms of temperature and pressure, below are general guidelines.  If this is your first time ordering with us, we do recommend ordering a few extra designs for use in determining optimal temp, time and pressure for your press. A household iron will not work on these transfers.

1ST PRESS

1st Press: 300-310 degrees for 10-15 seconds medium pressure with image in proper placement.  Each heat press does vary and some experimenting may be necessary for optimal results.

Peel Cold The transfer should cool completely to the touch before removing the film. (rubbing the film with cloth is recommended)

2ND PRESS

2nd Press: Cover with Teflon (for shiny look) or parchment paper (for matte look), 300-310 degrees for 5-10 sec, medium pressure.

Note: Firm and even pressure is important for good adhesion, avoid any pocket/seams/buttons/zipper/etc. within the press area

Polyester/Blend Fabric: Lower the temperature 300-310 degrees & shorten time 3-8 seconds, as these fabrics absorb heat at much faster rate. You can press multiple times if the transfer is not adhering to the fabric.

100% Polyester: Lower the temperature to 250-285 degrees & shorten press time to 3-8 seconds, this fabric can take some tweaking with your press to determine the best time, temp and pressure.  We suggest practicing to determine the proper settings.  You can press multiple times if the transfer is not adhering to the fabric, just allow the fabric time to cool in between.

Drawer Title
Similar Products